Precision-extruded aluminum profile to DIN 17615, warm hardened, anodized natural, smooth ends. Used for making adapters.

• Profile area: 152 mm2
• Section modulus: Wx = 0.138 cm3 Wy = 0.574 cm3
• Moment of inertia: Jx = 0.044 cm4 Jy = 0.861 cm4
• Tolerance length DIN 7168
• Distortion tolerance: 1 mm/m
• Straightness tolerance: 0.5 mm/m
• Weight: 0.411 kg/m

For fixing two perpendicular dovetails for light loads – alu minum, anodized natural.

• Weight: 0.030 kg

Bracket for connecting medium loads at 90° – aluminum, anodized natural.

• Resistance to displacement: 900 N (two profiles against one another)
• Required torque: 3 Nm
• Perpendicularity of the clamping: ± 0.03 mm grooves (referred to a length of 33 mm)
• Weight: 0.066 kg
   

For fixing two dovetails with an angular displacement (DS-0-40), or rotationally adjustable adapters between any surface and dovetail (DS-4-40) – aluminum, anodized natural.

• Weight: 0.024 kg
   

Standard connector for joining dovetail with heavy loads – aluminum, anodized natural.

• Resistance to displacement: 1400 N (two profiles against one another)
• Required torque: 3 Nm
• Parallelism of the clamped surfaces: ± 0.02 mm
• Weight: 0.026 kg
   

To use the Piezo M12 focus module, in addition to the module to be purchased here, a PCB camera, as well as a (S-mount) lens is needed. These can be seen in the picture, but are not included in the price offered here.

Price according to agreement.

Standard connector for joining light loads – aluminum, surface natural anodized.

• Resistance to displacement: 150 N (two profiles against one another)
• Required torque: 1 Nm
• Parallelism of the clamped surfaces: ± 0.02 mm
• Weight: 0.003 kg
   

Standard connector for joining dovetail with heavy loads – aluminum, anodized natural.

• Resistance to displacement: 800 N (two profiles against one another)
• Required torque: 3 Nm
• Parallelism of the clamped surfaces: ± 0.02 mm
• Weight: 0.037 kg
   

For fixing two perpendicular dovetails for heavy loads – aluminum, anodized natural.

• Weight: 0.077 kg
   

Standard connector for joining dovetail with medium loads – aluminum, anodized natural.

• Resistance to displacement: 700 N (two profiles against one another)
• Required torque: 3 Nm
• Parallelism of the clamped surfaces: ± 0.02 mm
• Weight: 0.013 kg
   

For fixing two perpendicular dovetails for heavy loads – aluminum, anodized natural.

• Weight: 0.041 kg/m
   

Precision-extruded aluminum section to DIN 17615 – warm hardened, surface natural anodized, smooth ends.

• Profile area: 104 mm2
• Section modulus: Wx = 0.177 cm3 Wy = 0.351 cm3
• Moment of inertia: Jx = 0.071 cm4 Jy = 0.351 cm4
• Tolerance length: DIN 7168
• Distortion tolerance: 0.8 mm/m
• Straightness tolerance: 0.3 mm/m
• Weight: 0.282 kg/m
   

Bracket for connecting light loads at 90° – aluminum, anodized natural.

• Resistance to displacement: 450 N (two profiles against one another)
• Required torque: 3 Nm
• Perpendicularity of the clamping: ± 0.02 mm grooves (referred to a length of 13 mm)
• Weight: 0.022 kg
   

Connector between round dovetail and linear dovetail – aluminum, anodized natural.

• Resistance to displacement: 2000 N
• Verdrehfestigkeit: 90 Nm
• Required torque: 6 Nm
• Parallelism of the clamped surfaces: ± 0.03 mm
• Weight: 0.070 kg
   

Precision-extruded aluminum profile to DIN 17615, warm hardened, anodized natural, smooth ends.

• Required torque: 3 Nm
• Weight: 0.052 kg/m
   

Precision-extruded aluminum section to DIN 17615 – warm hardened, surface natural anodized, smooth ends. Used for making adapters.

• Profile area: 147 mm2
• Section modulus: Wx = 0.118 cm3, / Wy = 0.603 cm3
• Moment of inertia: Jx = 0.039 cm4 / Jy = 0.845 cm4
• Tolerance length: DIN 7168
• Distortion tolerance: 0.8 mm/m
• Straightness tolerance: 0.3 mm/m
• Weight: 0.398 kg/m
   

Connector for joining dovetails, only for light loads – alu minum, anodized natural. Wedging the dovetails by means at lobe knob.

• Parallelism of the clamped surfaces: ± 0.02 mm
• Weight: 0.060 kg
   

For fixing two dovetails with an angular displacement.

• Weight 0.003 kg

Precision-extruded aluminum section to DIN 17615 – warm hardened, surface natural anodized, smooth ends.

• Profile area: 374 mm2
• Section modulus: Wx = Wy = 3.05 cm3
• Moment of inertia: Jx = Jy = 5.183 cm4
• Tolerance length DIN 7168
• Distortion tolerance: 0.8 mm/m
• Straightness tolerance: 0.3 mm/m
• Weight: 1.012 kg/m

Standard connector for joining medium loads – aluminum, surface natural anodized.

• Resistance to displacement: 400 N (two profiles against one another)
• Required torque: 1 Nm
• Parallelism of the clamped surfaces: ± 0.02 mm
• Weight: 0.008 kg
   

For rigid joints to the floor or table-top – aluminum, surface natural anodized.

• Weight 0.032 kg
   

Used for joining two perpendicular components, that ar e individually adjustable – aluminum, surface natural anodized.

• Weight 0.032 kg
   

For fixing two perpendicular dovetails – aluminum, sur face natural anodized.

• Weight: 0.009 kg
   

Connector between round dovetail and linear dovetail – aluminum, surface natural anodized.

• Resistance to displacement: 400 N
• Resistance to turn: 4 Nm
• Required torque: 1 Nm
• Parallelism of the clamped surfaces: ± 0.03 mm
• Weight: 0.010 kg