For mounting plates to pr ofiles – aluminum, anodized natural.

• Esistance to displacement: 1875 N (of the connectors)
• Required torque: 6 Nm
• Weight: 0.120 kg
   

Bracket for connecting light loads at 90° – aluminum, anodized natural.

• Resistance to displacement: 1800 N
• Required torque: 6 Nm
• Perpendicularity of the clamping: ± 0.02 mm grooves (referred to a length of 19 mm)
• Weight: 0.050 kg
   

female sub-D connector cable for EyeMIO with Sub-D 15 connector.

IDT3 series shines from a cylindrical surface to provide a tunnel illumination. The illumination is able to provide even illumination for long cylindrical surface.

Application: crack, chip, stains and mark on cylindrical surface or shafts.

CASC series provide co-axial illumination for high magnification tele-centric lenses. The lights are reflected by right angle prism cube beam solitter to provide light in line with the camera.

Application: surface inspection and alignment, wafer, metal surface, film, LCD and glass, pattern on PCB.

HBF series designed to replace halogen light source, spot series offer 4 type colours: red, green, blue and white. And long life time and low power consumption.

Application: in macro lenses inspection, spot light.

Light guide is fiber optic for LED Fiber light module (FIBX2).

• Interface: → VR Analog Controller

• Dimension: → 90 x 24 x 42 mm

• Board Voltage: → +24 VDC

• Fix Output Current [per channel]: → 2A

• Intensity: → VR Control (Adjustable)

• Mode: → Constant mode

Bracket for connecting medium loads at 90° – aluminum, anodized natural.

• Resistance to displacement: 3000 N
• Required torque: 6 Nm
• Perpendicularity of the clamping: ± 0.03 mm grooves (referred to a length of 45 mm)
• Weight: 0.130 kg
   

DLQ2 & DLF2 series provide diffused even illumination over from sides. The even illumination is suitable for inspection of rectangular work-piece.

Application: BGA ball inspection and QFP lead inspection

CAS2 series provide co-axial illumination for tele-centric lenses. The lights are reflected by 45 degrees half mirror to provide light in line with the camera.

Application: surface inspection and alignment, wafer, metal surface, film, LCD and glass, pattern on PCB.

FIBX2 series is an integrated HBF Series (Spot Light) and Controller. The integrated form provides easy installation and suitable for fiber optic illumination.

Bracket for connecting heavy loads at 90° – aluminum, anodized natural.

• Resistance to displacement: 4500 N
• Required torque: 6 Nm
• Perpendicularity of the clamping: ± 0.04 mm grooves (referred to a length of 70 mm)
• Weight: 0.250 kg

• ANG-1000-CH1-XX-A1/ ANG-1000-CH1-24V: 1 channel LED light source for analogue
• ANG-2000-CH2-XX-A1: 2 channel LED light source for analogue
• ANG-4000-CH4-XX-A1: 4 channel LED light source for analogue

LBL3 series is a bar-shaped backlight where the LEDs are arranged in a dense array and shine into a diffuser.

Application: Inspection of making transparent object.

LED is mounted inside a dome, strong irradiation

can be made at whole angles and extreme bright light.

Application: SMD LED inspection, SMD resistor, Crack and chip.

CAS2 45 series is an extended version of coaxial light which allow camera to be mounted at 90 degrees from the inline light. This illumination is suitable for limited camera mounting distances or bottom inspection.

Bracket for connecting medium loads at 90° with r elief for cables – aluminum, anodized natural.

• Resistance to displacement: 3000 N
• Required torque: 6 Nm
• Perpendicularity of the clamping: ± 0.04 mm grooves (referred to a length of 48 mm)
• Weight: 0.200 kg

DLQ2 & DLF2 series provide diffused even illumination over from sides. The even illumination is suitable for inspection of rectangular work-piece.

Application: BGA ball inspection and QFP lead inspection.

LSN4 series consist of a lens that converges the light from an array of LED providing an intense line illumination.

This illumination is suitable for line scan camera application.

Bracket connector for 45° joints – aluminum, anodized natural.

• Resistance to displacement: 2000 N
• Required torque: 6 Nm
• Weight: 0.1 kg
   

Standard connector for joining dovetail with heavy loads – aluminum, anodized natural.

• Resistance to displacement: 2000 N (two profiles against one another)
• Required torque: 6 Nm
• Parallelism of the clamped surfaces: ± 0.02 mm
• Weight: 0.055 kg
   

IDS4 series shine from a conical surface providing illumination from all angles. The illumination is able to provide images without shadows.

Application: crack, chip, stains on circular or cylindrical objects, solder inspection and substrate inspection.

BHS4 Series LED are arranged in a dense array and shine into a diffuser. The even light shines from the diffuser provides are illumination. Cascade able PCB based on 25mm x 25mm or 30mm x 30mm (lenght: 30/60/80/120).

Application: lead frame inspection, shape recognition, size measurement.

Used to join two perpendicular dovetails – aluminum, anodized natural.

• Resistance to displacement: 1000 N
• Required torque: 6 Nm
• Weight: 0.060 kg
   

LBDQ series is a combination of 4 light tubes to provide an even inspection. Each light tube angle can be adjusted for different height application.

Application: label inspection, character inspection, code recognition.

Standard connector for joining dovetail with medium loads – aluminum, anodized natural.

• Resistance to displacement: 1000 N (two profiles against one another)
• Required torque: 6 Nm
• Parallelism of the clamped surfaces: ± 0.02 mm
• Weight: 0.020 k