Precision-extruded aluminum profile to DIN 17615, warm hardened, surface anodized natural, smooth ends.
Suitable for substructures and mounting elements which are exposed to dynamic loads.

• Profile area: 1480 mm²
• Section modulus: Wx = Wy = 23 cm³
• Moment for inertia: Jx = Jy = 76 cm4
• Tolerance length DIN 7168
• Distortion tolerance 1 mm/m
• Straightness tolerance 0.5 mm/m
• Weight 3.996 kg/m

Precision-extruded aluminum profile to DIN 17615, warm
hardened, surface natural, smooth ends. Suitable for substructures and mounting elements which are not exposed to
dynamic loads.

• Profile area: 809 mm2
• Section modulus: Wx = Wy = 13 cm3
• Moment of inertia: Jx = Jy = 45 cm4
• Tolerance length DIN 7168
• Distortion tolerance: 1 mm/m
• Straightness tolerance: 0.5 mm/m
• Weight: 2.186 kg/m

Precision-extruded aluminum profile to DIN 17615, warm hardened, surface anodized natural, smooth ends. 3000 mm long.

• Profile area: 1767 mm2
• Section modulus: Wx = Wy = 37.82 cm3
• Moment of inertia: Jx = Jy = 181.53 cm4
• Tolerance length DIN 7168
• Distortion tolerance: 1 mm/m
• Straightness tolerance: 0.5 mm/m
• Gewicht: 4.771 kg/m

Precision-extruded aluminum profile to DIN 17615, warm hardened, surface anodized natural, smooth ends.

• Profile area: 368 mm2
• Section modulus: Wx = 1.025 cm3 / Wy = 1.640 cm3
• Moment of inertia: Jx = 0.820 cm4 / Jy = 3.280 cm4
• Tolerance length DIN 7168
• Distortion tolerance: 1 mm/m
• Straightness tolerance: 0.5 mm/m
• Weight: 0.980 kg/m

Precision-extruded aluminum profile to DIN 17615, warm hardened, anodized natural, smooth ends. Used for making adapters.

• Profile area: 271 mm2
• Section modulus: Wx = 0.32 cm3 / Wy = 1.36 cm3
• Moment of inertia: Jx = 0.14 cm4 / Jy = 2.72 cm4
• Tolerance length DIN 7168
• Distortion tolerance: 1 mm/m
• Straightness tolerance: 0.5 mm/m
• Weight: 0.732 kg/m

Precision-extruded aluminum profile to DIN 17615, warm hardened, anodized natural, smooth ends. Used for making adapters.

• Profile area: 600 mm2
• Section modulus: Wx = 1.04 cm3 / Wy = 4.83 cm3
• Moment of inertia: Jx = 0.67 cm4 / Jy = 13.53 cm4
• Tolerance length DIN 7168
• Distortion tolerance: 1 mm/m
• Straightness tolerance: 0.5 mm/m
• Weight: 1.620 kg/m

Precision-extruded aluminum profile to DIN 17615, warm
hardened, anodized natural. With T-slot for M5, M6 and M8
square nut (non slip with drop protection) of steel, chemically
nickel-plated.

• Section modulus:
  • Wx = 1.346 cm3
  • Wy = 1.7466 cm3
• Tolerance length: DIN 7168
• Weight: 0.8546 kg/m

Snap-on profile for routing pneumatic hoses and electric cables – aluminum, warm hardened, anodized natural, smooth ends.

• Tolerance length DIN 7168
• Weight: 0.549 kg/m

For mounting plates to pr ofiles – aluminum, anodized natural.

• Esistance to displacement: 1875 N (of the connectors)
• Required torque: 6 Nm
• Weight: 0.120 kg
   

Bracket for connecting light loads at 90° – aluminum, anodized natural.

• Resistance to displacement: 1800 N
• Required torque: 6 Nm
• Perpendicularity of the clamping: ± 0.02 mm grooves (referred to a length of 19 mm)
• Weight: 0.050 kg
   

Bracket for connecting medium loads at 90° – aluminum, anodized natural.

• Resistance to displacement: 3000 N
• Required torque: 6 Nm
• Perpendicularity of the clamping: ± 0.03 mm grooves (referred to a length of 45 mm)
• Weight: 0.130 kg
   

Bracket for connecting heavy loads at 90° – aluminum, anodized natural.

• Resistance to displacement: 4500 N
• Required torque: 6 Nm
• Perpendicularity of the clamping: ± 0.04 mm grooves (referred to a length of 70 mm)
• Weight: 0.250 kg

Bracket for connecting medium loads at 90° with r elief for cables – aluminum, anodized natural.

• Resistance to displacement: 3000 N
• Required torque: 6 Nm
• Perpendicularity of the clamping: ± 0.04 mm grooves (referred to a length of 48 mm)
• Weight: 0.200 kg

Bracket connector for 45° joints – aluminum, anodized natural.

• Resistance to displacement: 2000 N
• Required torque: 6 Nm
• Weight: 0.1 kg
   

Standard connector for joining dovetail with heavy loads – aluminum, anodized natural.

• Resistance to displacement: 2000 N (two profiles against one another)
• Required torque: 6 Nm
• Parallelism of the clamped surfaces: ± 0.02 mm
• Weight: 0.055 kg
   

Used to join two perpendicular dovetails – aluminum, anodized natural.

• Resistance to displacement: 1000 N
• Required torque: 6 Nm
• Weight: 0.060 kg
   

Standard connector for joining dovetail with medium loads – aluminum, anodized natural.

• Resistance to displacement: 1000 N (two profiles against one another)
• Required torque: 6 Nm
• Parallelism of the clamped surfaces: ± 0.02 mm
• Weight: 0.020 k

Connector for joining short dovetails with light loads – aluminum, anodized natural.

• Resistance to displacement: 750 N (two profiles against one another)
• Required torque: 6 Nm
• Parallelism of the clamped surfaces: ± 0.02 mm
• Weight: 0.016 kg

Standard connector for joining dovetail with heavy loads and increased distance – aluminum, anodized natural.

• Resistance to displacement: 2000 N (two profiles against one another)
• Required torque: 6 Nm
• Parallelism of the clamped surfaces: ± 0.02 mm
• Weight: 0.096 kg
   

Adapter with one row of holes – aluminum, anodized natural.

Weight:

• SP-32E-40: 0.022 kg
• SP-64E-40: 0.043 kg

For rigid joints to the floor or table-top – aluminum, anodized natural.

• Weight: 0.360 kg
   

Standard connector for joining dovetails with medium loads and increased distance – aluminum, anodized natural.

• Resistance to displacement: 1000 N (two profiles against one another)
• Required torque: 6 Nm
• Parallelism of the clamped surfaces: ± 0.02 mm
• Weight: 0.022 kg
   

Adapter with two rows of holes – aluminum, anodized natural.

Weight:

• SP-20D-40: 0.013 kg
• SP-32D-40: 0.020 kg
• SP-64D-40: 0.040 kg

Used for joining two perpendicular components, which ar e individually adjustable – aluminum, anodized natural.

• Weight: 0.220 kg

Connector for adjustment of angles – aluminum, anodized natural.

• Resistance to displacement: 2000 N (two profiles against one another)
• Required torque: 6 Nm
• Weight: 0.140 kg
   

Precision-extruded aluminum profile to DIN 17615, warm hardened, surface natural, smooth ends. Suitable for substructures and mounting elements which are not exposed to dynamic loads.

• Profile area: 565 mm2
• Section modulus: Wx = Wy = 7.2 cm3
• Moment of inertia: Jx = Jy = 17.9 cm4
• Tolerance length DIN 7168
• Distortion tolerance: 1 mm/m
• Straightness tolerance: 0.5 mm/m
• Weight: 1.53 kg/m
   

Used for joining two perpendicular components, which are individually adjustable in two axes – aluminum, anodized natural.

• Weight: 0.204 kg
   

Standard connector for joining dovetail with heavy loads – aluminum, anodized natural.

• Resistance to displacement: 1400 N (two profiles against one another)
• Required torque: 3 Nm
• Parallelism of the clamped surfaces: ± 0.02 mm
• Weight: 0.045 kg
   

Precision-extruded aluminum profile to DIN 17615, warm hardened, surface natural, smooth ends. Suitable for substructures and mounting elements which are not exposed to dynamic loads.

• Profile area 509 mm2
• Section modulust Wx = 4.95 cm3 Wy = 7.15 cm3
• Moment of inertia Jx = 12.25 cm4 Jy = 17.69 cm4
• Tolerance length DIN 7168
• Distortion tolerance 1 mm/m
• Straightness tolerance 0.5 mm/m
• Weight 1.37 kg/m

A connector that performs the function of «pinning» – aluminum anodized black.

• Reposition repeatability: ± 0.05 mm
• Resistance to displacement: 5250 N (two profiles against one another)
• Required torque: PK 2 Nm
• Parallelism of the clamped surfaces: ± 0.02 mm
• Weight: 0.156 kg