Industrial Lighting

Industrial Lighting

The Advanced Imaging Component Shop offers you a large selection of industrial illumination of persuasive quality.

The selection and configuration of the appropriate illumination is crucial for the quality of the image capture. The loss of information due to an inadequate illumination hinders the image evaluation or else makes it impossible.

To find the adequate illumination is a challenging task. Our engineers will happily assist you with the decision, when and why a particular illumination is best suitable for a certain application.


Display per page
Sort by
1 - 30 of 43 results

LED lighting controller

Product no.: EL-SD-1000-D1

  • Interface: → VR Analog Controller

  • Dimension: → 90 x 24 x 42 mm

  • Board Voltage: → +24 VDC

  • Fix Output Current [per channel]: → 2A

  • Intensity: → VR Control (Adjustable)

  • Mode: → Constant mode

In stock
Delivery weight: 648 g

EyeLight IDT3 tunnel illumination

Product no.: EL-IDT3-00-120-1-X

IDT3 series shines from a cylindrical surface to provide a tunnel illumination. The illumination is able to provide even illumination for long cylindrical surface.

Application: crack, chip, stains and mark on cylindrical surface or shafts.

Product data sheet
In stock
Delivery weight: 160 g

EyeLight CASC co-axial light

Product no.: EL-CASC-00-025-X-X

CASC series provide co-axial illumination for high magnification tele-centric lenses. The lights are reflected by right angle prism cube beam solitter to provide light in line with the camera.

Application: surface inspection and alignment, wafer, metal surface, film, LCD and glass, pattern on PCB.

Product data sheet
In stock
Delivery weight: 130 g

EyeLight HBF LED spotlight

Product no.: EL-HBF-00-08-1-X-5V

HBF series designed to replace halogen light source, spot series offer 4 type colours: red, green, blue and white. And long life time and low power consumption.

Application: in macro lenses inspection, spot light.

Product data sheet
In stock

EyeLight MILX light guide

Product no.: EL-MILX-LG-X

Light guide is fiber optic for LED Fiber light module (FIBX2).

Product data sheet
In stock
Delivery weight: 50 g

EyeLight LLA dark field ring light 90

Product no.: EL-LLA-90-050-1-X

LED arrays are arranged in low angle to provide side illumination. LLA series are available in 1 row to suit different brightness requirements.

Application: edge detection, scratched on metal or glossy surface.

Product data sheet
In stock
Delivery weight: 85 g

EyeLight ANG analogue power supply

Product no.: EL-ANG-1000-CH1-XX-A1-YY

  • ANG-1000-CH1-XX-A1/ ANG-1000-CH1-24V: 1 channel LED light source for analogue
  • ANG-2000-CH2-XX-A1: 2 channel LED light source for analogue
  • ANG-4000-CH4-XX-A1: 4 channel LED light source for analogue
In stock
Delivery weight: 200 g

EyeLight DLQ2 & DLF2 square illumination

Product no.: EL-DLQ2-90-030-1-X

DLQ2 & DLF2 series provide diffused even illumination over from sides. The even illumination is suitable for inspection of rectangular work-piece.

Application: BGA ball inspection and QFP lead inspection

Product data sheet
In stock
Delivery weight: 55 g

EyeLight CAS2 co-axial light

Product no.: EL-CAS2-00-150-X-X

CAS2 series provide co-axial illumination for tele-centric lenses. The lights are reflected by 45 degrees half mirror to provide light in line with the camera.

Application: surface inspection and alignment, wafer, metal surface, film, LCD and glass, pattern on PCB.

Product data sheet
In stock
Delivery weight: 120 g

EyeLight LED fiber light module

Product no.: EL-FIBX2-WP

FIBX2 series is an integrated HBF Series (Spot Light) and Controller. The integrated form provides easy installation and suitable for fiber optic illumination.

Product data sheet
In stock
Delivery weight: 1,100 g

EyeLight LBL3 line illumination

Product no.: EL-LBL3-00-100-X-X

LBL3 series is a bar-shaped backlight where the LEDs are arranged in a dense array and shine into a diffuser.

Application: Inspection of making transparent object.

Product data sheet
In stock
Delivery weight: 80 g

EyeLight LSW ring light

Product no.: EL-LSW-00-040-2-X

The LED arrays of the LSW ring light series are arranged so that the light arrays are concentrated to a spot for an extreme bright light. Due to using a flexible PCB board, the product quality and efficiency increased. With the flexible boards the user is able to achieve an optimized angle with variations of outer and inner diameter to target a workpiece.

Product data sheet
In stock
Delivery weight: 50 g

EyeLight IDD dome light

Product no.: EL-IDD-00-045-4-X

LED is mounted inside a dome, strong irradiation

can be made at whole angles and extreme bright light.

Application: SMD LED inspection, SMD resistor, Crack and chip.

Product data sheet
In stock
Delivery weight: 80 g

EyeLight CAS2 45 co-axial light

Product no.: EL-CAS2-45-010-X-X

CAS2 45 series is an extended version of coaxial light which allow camera to be mounted at 90 degrees from the inline light. This illumination is suitable for limited camera mounting distances or bottom inspection.

Product data sheet
In stock
Delivery weight: 120 g

EyeLight DLS2 square lighting

Product no.: EL-DLS2-60-050-1-X

DLS2 series provide diffused even illumination over a surface. The even illumination prevents glaring for reflective surface.

Application: character recognition on shining surface, lead inspection.

Product data sheet
In stock
Delivery weight: 120 g

EyeLight LSQ 00 ring light

Product no.: EL-LSQ-00-050-2-X

LED arrays are arranged to provide concentrated light with a square housing. The different LED angle allows small or wider spot illumination.

Application: flat surface, fiducially recognition.

Product data sheet
In stock
Delivery weight: 60 g

EyeLight MLBX lighting bar

Product no.: EL-MLBX-00-060-2-X

The 2 Row Mid-Power SMD LED with lens arrays are arranged in rectangular array to provide rectangular illuminations. The rectangular illumination can be mounted with different angle to provide difference in illumination reflection for image processing.

Application: general illumination, label inspection, character inspection, code recognition.

Product data sheet
In stock
Delivery weight: 90 g

EyeLight DLR2 diffuse ring light

Product no.: EL-DLR2-45-050-2-X

DLR2 series provide diffused even illumination over a surface. The even illumination prevents glaring for reflective surface.

Application: character recognition on shining surface, lead inspection.

Product data sheet
In stock
Delivery weight: 70 g

EyeLight DLQ2 & DLF2 square illumination

Product no.: EL-DLF2-90-050-1-X

DLQ2 & DLF2 series provide diffused even illumination over from sides. The even illumination is suitable for inspection of rectangular work-piece.

Application: BGA ball inspection and QFP lead inspection.

Product data sheet
In stock
Delivery weight: 55 g

EyeLight LSN4 line illumination

Product no.: EL-LSN4-00-75-1-X

LSN4 series consist of a lens that converges the light from an array of LED providing an intense line illumination.

This illumination is suitable for line scan camera application.

Product data sheet
In stock
Delivery weight: 980 g

EyeLight DFR3 ring light

Product no.: EL-DFR3-00-050-1-X

DFR3 series provide diffused even illumination over surface. A conical illumination surface makes it possible to illuminate a work piece from almost any angle.

Application: printed character on IC chips, PCB component, printing on caps, and Wafer OCR inspection.

Product data sheet
In stock
Delivery weight: 70 g

EyeLight LLA dark field ring light 60

Product no.: EL-LLA-60-070-2-X

The LED arrays are arranged in low angle to provide side illumination. The LLA series are available in 2 and 3 rows to suit different brightness requirements.

Application: edge detection, scratched on metal or glossy surface.

Product data sheet
In stock
Delivery weight: 85 g

EyeLight DLW2 square lighting

Product no.: EL-DLW2-60-070-1-X

DLS2 & DLW2 series provide diffused even illumination over a surface. The even illumination prevents glaring for reflective surface.

Application: character recognition on shining surface, lead inspection.

Product data sheet
In stock
Delivery weight: 120 g

EyeLight IDS4 indirect illumination

Product no.: EL-IDS4-00-050-1-X

IDS4 series shine from a conical surface providing illumination from all angles. The illumination is able to provide images without shadows.

Application: crack, chip, stains on circular or cylindrical objects, solder inspection and substrate inspection.

Product data sheet
In stock
Delivery weight: 80 g

EyeLight BHS4 Backlight

Product no.: EL-BHS4-00-025-X-X

BHS4 Series LED are arranged in a dense array and shine into a diffuser. The even light shines from the diffuser provides are illumination. Cascade able PCB based on 25mm x 25mm or 30mm x 30mm (lenght: 30/60/80/120).

Application: lead frame inspection, shape recognition, size measurement.

Product data sheet
In stock
Delivery weight: 100 g

EyeLight LBDQ multiple square illumination

Product no.: EL-LBDQ-00-050-1-X

LBDQ series is a combination of 4 light tubes to provide an even inspection. Each light tube angle can be adjusted for different height application.

Application: label inspection, character inspection, code recognition.

Product data sheet
In stock
Delivery weight: 320 g

EyeLight BHH Backlight

Product no.: EL-BHH-00-035-X-X

BHH series is a high power backlight which LED are arranged in a dense array and shine into a diffuser. It is suitable to use in high speed application.

Application: lead frame inspection, shape recognition, size measurement

Product data sheet
In stock
Delivery weight: 100 g

EyeLight IDQ3 square illumination

Product no.: EL-IDQ3-00-120-X-X

IDQ3 series provide even and diffuses illumination over a square area. The illumination is able to provide excellent illumination for square or rectangular objects.

Application: crack, chip, stains and mark on edge of square or rectangular object.

Product data sheet
In stock
Delivery weight: 1,500 g

EyeLight ultraviolet illumination

Product no.: EL-LSW-15-070-2-X

provides ultraviolet illumination.

Product data sheet
In stock
Delivery weight: 140 g

EyeLight LBRX beam lighting 3 row

Product no.: EL-LBRX-00-040-3-X

The 3 Row SMD LED with lens arrays are arranged in rectangular array to provide rectangular illumination. The rectangular illumination can be mounted with different angle to provide difference in illumination reflection for image processing. Optional diffuser can be added to all LBRX series for more even light distribution.

Application: general illumination, label inspection, character inspection, code recognition

Product data sheet
In stock
Delivery weight: 40 g
1 - 30 of 43 results