3D_Sensoren


Display per page
Sort by

EyeScan AT 3D sensor

Product no.: ES-AT C5-XXCSXX-XX

(price on request)

Technical Data:

  • Profile Speed up to 25000 Hz (depending on the model)
  • Profile Resolution up to 4096 points / Profile (depending on the model)
  • Interfaces GigE Vision / GenICam
  • Dynamic Range 90 dB (with HDR-3D)
  • Connector M12
  • Protection Class IP67
  • Laser Safety Class 2M, 3R, 3B
  • Sensor Algorithms MAX, TRSH, COG, FIR-PEAK
  • Digitale IOs Opto-isoliated Inputs (2x) / Outputs (2x), Trigger, Encoder (RS442)
  • Power supply 10 – 24V DC
  • PC requirements Gigabit Ethernet NIC
In stock

Eye Scan LT 3D y-series

Product no.: ES-LT-3D-yXX

(price on request)

Technische Data:

  • Laser: Class 2M laser line, wave length 660 nm, 30 mW
  • Sensor: CMOS 1/1.8“ Eff.
  • no. Of pixel: 1280 (H) x 1024 (V) (Wide VGA)
  • Pixel size: 5.3 (H) x 5.3 (V) µm
  • Chip size: 4.51 (H) x 2.88 (V) mm
  • High-speed Shutter: 21 µs + steps of 21 µs
  • Low-speed Shutter: up to 3 sec. adjustable integration time
  • Integration: Global Shutter
  • Picture taking: Program-controlled or external high speed trigger, full-frame (55 frames per second) & partial scanning, jitterfree acquisition
  • Scan Rate: up to1 kHz
  • Image Display: via 100 Mbit Ethernet on PC
  • Processor: Texas Instruments TM320DM6435 „Da Vinci“ DSP 700 MHz, 5600 MIPS
  • RAM: 128 Mbytes DDR2-RAM @ 333 MHz
  • Flash EPROM: 32 Mbytes flash EPROM
  • Process Interface: 2 In- / 4 Outputs, Outputs 4x400 mA
  • Trigger: 1 picture trigger input, 1 flash trigger output, 24V / 200 mA
  • Ethernet Interface: 10/100 Mbit
  • Storage Conditions: -20 .. +60 °C, Max. humidity: 90 %, non-condensing
  • Operating Conditions: 0 .. +50 °C, Max. humidity: 80 %, non-condensing
  • Power Supply: 24V +/- 20% DC, max. 300 mA
  • Power Consumption: ≈ 2.6 W
  • Dimensions and weight: 140 x 70 x 35 mm, ca. 400 gr
Product data sheet
In stock

EyeScan ME 3D sensor

Product no.: ES-ME-3D-MLSL xx

(price on request)

Calibrating the EyeScan ME 3D MLSL lasertriangulation sensor - like all of EVT's 3D products -  is done within the factory.

Therefore it is sufficient to connect the sensor to the standard interface and the evaluation can be carried out in no time.

The easy-to-handle drag-and-drop programming, as already known from other EVT products, allows to either detemine volume, carry out measurements in space or else define positions for the robot-gripper.

Product data sheet
In stock

EyeScan BT 3D sensor

Product no.: ES-BT-3D

(price on request)

Technical Data:

  • 3D Technology: PMD Time of Flight (19k-S3)
  • Pixel: 160 x 120
  • DSP: BF561 (2 x 500 MHz)
  • RAM: 32 Mbyte SD-RAM
  • FLASH: up to 64 Mbyte NOR
  • Frame Rate: up to 40 fps Range 3 – 5 m
  • LED: 2 x 850 nm
  • Power Supply: 24V @ 0.7 A
  • Ethernet: 10/100 Mbit
  • RS232: 1
  • RS485: 1
  • GPIO: 3
  • Trigger: Input 1
  • Temperature range Industrial: -40 bis +85 °C
  • Cooling: Passive
  • Dimensions: (B x H x T) 60 x 60 x 40 mm
     
In stock

EyeScan BA 3D sensor

Product no.: ES-BA-3D

(price on request)

Technical data:

  • Sensor Vendor: Panasonic
  • Resolution: 640 x 480 pixels
  • Frame Rate: 20 fps
  • Interface: Gigabit Ethernet-, GigE Vision- and GenICam-compliant
  • Working Range: 0 m - 13 m
  • Accuracy: +/- 1 cm (depending on tableau)
  • Lens: 57°h x 43° v
  • Operating System: Windows- and Linux-compliant
  • Digital I/O: 1 In / 1 Out
  • Operating temperature: 0°C – 50°C
  • Weight: 0,4 kg
  • Power: 24 V DC, 15 W

 

Product data sheet
In stock

AIC Saturn 3D

* price on request

Processor: 2x ARM Cortex A9 with FPGA

Profile Rate: up to 6 kHz

Power over Ethernet (PoE)

Encoder Interface

Standard Interface: USB 2.0, Gigabit Ethernet

Output Data Interface: Gigabit Ethernet (PoE)

Communication Protocol: GigE Vision with GenICam

Power Supply: 24V DC

Power Consumption: < 6 W

0.00 *
Product data sheet
In stock
Delivery period: 30 working days
Delivery weight: 250 g
* Prices plus VAT, plus delivery